naughtika
OzVR4 Stalker
Hi everyone, here's a new thread for the COP kit..
Below are couple of pictures of the new set that I use
Front Bank
Rear Bank
Front and rear Bank
How the v3.1 harness is placed / installed
This has been tested with and without tune and works the same as the kit that I made in the past.
Also, this kit sits slightly lower compared to the v.2 kit and should allow you to use your factory engine cover.
Below are the members who's bought the kit from me
Price for the Kit$900 + postage
DUE to AUD vs USD Exchange rate, the new price for the COP kit is at $1150 including postage (to Eastern side of Australia only - for other location, I can get quotes for postage)
Kit consists of the following
- x6 Brand New Denso Ignition Coils (made in japan only)
- Set of PnP harness
- Pair of Plates to suit front and rear banks
- Set of washers as spacer
- x1 Brand New rocker cover bolt washer/seal
If you have any questions, please feel free to pm me or reply to this thread
=====
Update as of 04 Feb 2016
Price:$1050
=====
Update as of 16/04/2016
******PRICE UPDATE******
$850 Delivered - for OzVR4 Paid Members / $950 Delivered - for non-paid members
What's included..
6x Genuine Denso Coils (Japan)
Set of Plates (4mm CNC'd / Front and Back)
Set of Harness Nuts & Bolts for ease of Installation
1x Rocker Cover Bolt Gasket
=====
******PRICE UPDATE 19 March 2017******
$900 Delivered - for OzVR4 Paid Members / $1000 Delivered - for non-paid members
What's included..
- 6x Genuine Denso Coils (Japan)
- Set of Plates (4mm CNC'd / Front and Back) - Powder Coated in Black or Aluminum Color
- Set of Harness Nuts & Bolts for ease of Installation
- 1x Rocker Cover Bolt Gasket
- Set of Threaded Stand-Offs for proper mounting of the ignition coils
*****PRICE UPDATE 13TH JANUARY 2020*****
$1050 Delivered - for OzVR4 Paid Members / $1150 Delivered - for non paid members
What's included..
- 6x Genuine Denso Coils (Japan)
- Set of Plates (4mm CNC'd / Front and Back) - Powder Coated in Black or Aluminum Color
- Set of Harness Nuts & Bolts for ease of Installation
- 1x Rocker Cover Bolt Gasket
- Set of Threaded Stand-Offs for proper mounting of the ignition coils
Price update is due to importation taxes imposed on us, that means I can't get parts from US / Japan without paying GST
Below are couple of pictures of the new set that I use
Front Bank
Rear Bank
Front and rear Bank
How the v3.1 harness is placed / installed
This has been tested with and without tune and works the same as the kit that I made in the past.
Also, this kit sits slightly lower compared to the v.2 kit and should allow you to use your factory engine cover.
Below are the members who's bought the kit from me
Price for the Kit
DUE to AUD vs USD Exchange rate, the new price for the COP kit is at $1150 including postage (to Eastern side of Australia only - for other location, I can get quotes for postage)
Kit consists of the following
- x6 Brand New Denso Ignition Coils (made in japan only)
- Set of PnP harness
- Pair of Plates to suit front and rear banks
- Set of washers as spacer
- x1 Brand New rocker cover bolt washer/seal
If you have any questions, please feel free to pm me or reply to this thread
=====
Update as of 04 Feb 2016
Price:
=====
Update as of 16/04/2016
******PRICE UPDATE******
$850 Delivered - for OzVR4 Paid Members / $950 Delivered - for non-paid members
What's included..
6x Genuine Denso Coils (Japan)
Set of Plates (4mm CNC'd / Front and Back)
Set of Harness Nuts & Bolts for ease of Installation
1x Rocker Cover Bolt Gasket
=====
******PRICE UPDATE 19 March 2017******
$900 Delivered - for OzVR4 Paid Members / $1000 Delivered - for non-paid members
What's included..
- 6x Genuine Denso Coils (Japan)
- Set of Plates (4mm CNC'd / Front and Back) - Powder Coated in Black or Aluminum Color
- Set of Harness Nuts & Bolts for ease of Installation
- 1x Rocker Cover Bolt Gasket
- Set of Threaded Stand-Offs for proper mounting of the ignition coils
*****PRICE UPDATE 13TH JANUARY 2020*****
$1050 Delivered - for OzVR4 Paid Members / $1150 Delivered - for non paid members
What's included..
- 6x Genuine Denso Coils (Japan)
- Set of Plates (4mm CNC'd / Front and Back) - Powder Coated in Black or Aluminum Color
- Set of Harness Nuts & Bolts for ease of Installation
- 1x Rocker Cover Bolt Gasket
- Set of Threaded Stand-Offs for proper mounting of the ignition coils
Price update is due to importation taxes imposed on us, that means I can't get parts from US / Japan without paying GST