ebay oem equivlent:
oem replacement
other wise, you could retain the oem hard lower pipes
grab a core from ivan
then you need a 90 for the cold side
and then you need a pfl hot pipe or cut your fl pipe, and then two 45's and a bit of straight pipe
ill try find some pics in a bit
If you look at my pictures you'll see that the IC is upside down, because from Evo VIII onwards they got bigger and bigger (wider to be exact) and because the impact bar is slightly curved it didn't quite fit in between radiator & impact bar, so I put it in upside down but had to turn the intakes by 180°.
Tom, by the looks of it you need to get something made up for the hotside pipe also however you do not need to modify the hotside pipe.
Not the right thread but i've got one of them on its way. It takes ages if you don't use the courier option which i didn'tAnyone fitted one of these or know if they are good/terrible? Anything else around same price range or cheaper that is good?
http://cgi.ebay.com.au/HDI-GT-SPEC-...Accessories&hash=item45f385bea3#ht_2957wt_911
Haha crap thanks for making things very confusing there Paul! I refreshed and they'd been edited, phew. So in a PFL we can just buy a core, get some joins to make it fit the OEM lower pipes and we're done? Then perhaps Ivan's hard piping kit for the top pipes would be useful?