Larger throttle body

[AKKO]

Mine doesn't have ASC, TCL or AYC. It's a Type V. Less to go wrong!

ASA said different when i checked...

 

[AKKO]

ASA tells me there is a:

MD334007
MD334006
MD362352
MD352584

Can probably tell you what cars they are for when I get home.

Shows how much of a newbie I am when it comes to using ASA...
that'd be handy if you could thanks.

 

[tails]

ASA said different when i checked...

ASA is wrong then. I don't have the asc or even the mark on the relay box that says it has a relay. I also don't have the tlc switch. And I'm missing the plastic flares on the guards which I think is a type v thing.

 

[BCX]

PM me your VIN, i'll check out ASA.

 

[AKKO]

Hmmm a PM from Phil has me thinking that MD362352 is that throttle body I'm chasing...

Hopefully someone, perhaps Q with access to the different types could measure and confirm once and for all?

There are also several manifolds:

MD335102
MD352585

 

[AKKO]

Got my TB in the post today, its one of the larger ones but has three vacum lines at the top amongst other differences...
Not sure if its the right one after all that and maybe the magna TB option was a better idea though i thought theirs were on the smaller side aswell *shrug*

 

[Macca]

Its probably one with TCL and cruise control, put a picture up.

 

[AKKO]

Is this a version with cruise control, not sure what I'm looking at...

Else was going to strip it down and see if it was possible to swap the necessary bits between them and simply block off the extra lines. Where have others sourced the gasket?

Pics...

 

[Macca]

Its either the traction control or cruise control but yeah, that what that thing is. Christian has that stuff on his so he could probably give you a better idea on what it is exactly.

 

[Gt_Galant]

the traction control

I have one but for the 6a12 motor, i never tried to play around with it to see if you can block the extra lines and see if it will work, but i think it should still work.

 

[AKKO]

Cool, sounds promising
cruise would be nice to get working but is not the main objective here.

 

[naughtika]

its for either.. the verada's came with the TCL and Cruise control from memory..

imo, dont bother with removing it.. cause when you do, there's a chance that you'll screw up the seal/oring inside the TB..

 

[AKKO]

Thanks for that, but otherwise it should work just fine with blocking up the other lines?

Seems i'm gonig to have to swap over atleast one part from my old throttle body though, you'll notice in the first photo that there is a part of that black section with the plug snapped off i suspect during shipping...

 

[naughtika]

Thanks for that, but otherwise it should work just fine with blocking up the other lines?

Seems i'm gonig to have to swap over atleast one part from my old throttle body though, you'll notice in the first photo that there is a part of that black section with the plug snapped off i suspect during shipping...

from what i can see, the only part you wanna swap over are the TPS.. and unplug the ISC connector and plug yours in there..

 

[AKKO]

Yep, cheers.

Just got to get my hands on a suitable gasket now to make honing out the plenum easier and for subsequent fitting.

Anyone know if P/N: MD180361 is the correct gasket or...


Existing: MD184662
Required: MD322990 ?? < Leaning towards this one at the moment

 

[AKKO]

Eagerly awaiting a reply from Bill @ Ralliart regarding the gaskets.

/Edit: since ordered both plus a TJ mangna one and will post back with the most appropriate P/N.

 

[naughtika]

Chris, is this to suit the 67mm TB?

 

[naughtika]

Mal, you got the Magna gaskets? do you have them in stock and or part numbers?

 

[AKKO]

Happy to use whatever gasket so long as I can confirm it has the larger bore and fits otherwise.

As above a P/N would be helpful

 

[Macca]

That's all I used, a Magna gasket, worked well. Don't forget you are going to have to open up the opening in the plenum to match your new throttle body.