Part numbers to be added to Parts Guide

[niterida]

Can the PFL brake pads be added to the confirmed parts list :

Front DB1223
Rear DB1238

I did a search on here earlier and found conflicting information. So I pulled my pads out and made certain

 

[dwarfmarine]

FYI,
Cooper fuel filter WCF96 is only $16 compared to the equivalent Repco part at $39~(none In stock, so that includes a freight charge of $5-8 bucks)

My local Autopro ordered coopers for me and had it by 8am the next day (ordered at 3)

 

[pretzil]

Yeah, sounds about right, I got my WCF96 from autobarn for $18

 

[dwarfmarine]

I just couldn't believe that Repco wanted $40 for a fuel filter (which I'm sure I just happily paid last time, but won't again after I know the equivalent is half the price)

 

[Blackbird]

Ordered the wiper pushrod set (the linkage that drives the wipers from the wiper motor.... sit's underneath the plastic scuttle panel at the bottom of the wIndscreen)
Only needed the plastic ball socket bush that snaps onto the motor as mine was shagged (My bad)

2001 FL legnum VR-4 type S
Link Assy P/N: MR192798

Dare say it.. It's be the same for FL and PFL... and maybe the Galant..

Steve

 

[Blackbird]

Another one I've heard is a little tricky God knows I've been looking for one for ages..
couldn't find a Verada wrecking anywhere (apparently they are the same 'cept black)

Single din pocket for those running single din head units.. this is the perfect size...
It comes coloured in a dark grey... perfect of you have the dark grey suede recaros...
Screws hold it in at the sides (standard stereo mount)

MR147142

$29.65 from Amayama.

 

[brat81]

Hey guys not sure if you have a resident user that has access to ASA/CAPS.

So shoot me a PM or post in here and i'll get the part codes you so require.

I also have Nissan Fast and Subaru ( with most jap catalouges)

 

[pretzil]

Actually, somewhere on here is a link to a free download of ASA

 

[king_panther]

Hi guys,

Tie rod ends. Are these parts shared with any other Mitsu car?

Cheers,
Brad.

 

[slickd1]

Upper control arm ball joints (front) MB912506. Just fitted mine, seem good quality. Cist about $20 each from FEBEST on ebay.

 

[GVR40]

heater core fittings that crumble and fail
AW349218 - fitting
MR927776 - o-ring
these are from a magna so are fairly readily available and cheap from mitsi

 

[Jazdogz]

From another thread on here the clutch slave cylinder is MD748617 and is the same one used in several generations of Evo. I haven't tried it yet but it looks correct.

 

[TME_Steve]

Correct it is evo and correct that it is the same part and number

 

[ShadowofaDoubt]

I was on the hunt for some parts, using my knowledge, I've come up with this list so far. This was more for my reference, and I haven't got prices, but yeah.

Most of the timing gear appears the same as a 6A12, so there is local support for some parts.

There are also TRW, and 555 parts made for suspension. Even bilstien were making arms and balljoints, I don't beleive they're avaialble anymore though, and what I did find were 75% more then genuine.

 

[naughtika]

just adding these ones..

Sunvisor
LH - MR763249 - no s/roof
RH - MR763247 - no /sroof

LH - MR763249 - s/roof
RH - MR763247 - s/roof


Glove Box Hinge
MR146924

 

[Vr4ny]

Have a look at
http://mitsubishi.epc-data.com/legnum/.
Seems to have every part listed with numbers if you know what you are looking for.

 

[Jye]

Ordered the wiper pushrod set (the linkage that drives the wipers from the wiper motor.... sit's underneath the plastic scuttle panel at the bottom of the wIndscreen)
Only needed the plastic ball socket bush that snaps onto the motor as mine was shagged (My bad)

2001 FL legnum VR-4 type S
Link Assy P/N: MR192798

Dare say it.. It's be the same for FL and PFL... and maybe the Galant..

Steve

Do we know if there are any other compatible mitsu models that share the wiper linkages?

 

[naughtika]

Do we know if there are any other compatible mitsu models that share the wiper linkages?

unfortunately I don't think any would do, as the length would be specific to your model.. not even sure if the LHD would work

 

[Blackbird]

A bit late in the piece, I tried seeing if any locally made models like the lancer, magna and others fit... nothing came close... ordered mine through Amayama.

 

[Haydox]

Hi Peeps, does the pastic holder for the shift linkage on ignition barrel have its own part number? Can't seem to find it on the part catalogues.