Rumble while driving

vr4ssz

Leaving Skid Marks
Location
NSW
First Name
Shane
Drive
98 PFL Legnum VR-4, 2005 VZ SSZ, 1991 Cressida (1jz converted)
Hey guys

I got my pfl Legnum on the road after owning it for a year and previous owner hadn't driven it for at least 4, anyway.

There is a rumbling noise and it gets louder the faster u go, would this be a wheel bearing or maybe tire noise?

Anyway for me to check?
 

vr4ssz

Leaving Skid Marks
Location
NSW
First Name
Shane
Drive
98 PFL Legnum VR-4, 2005 VZ SSZ, 1991 Cressida (1jz converted)
That I haven't found out yet, sounds likes its from the back and gets louder the faster you go, its more of a grumling/rumbling noise.

Not grinding.
 

sideburns

Leaving Skid Marks
Location
NSW
First Name
Dave
Drive
Legnum s2 Vr4
Honda dc2 integra
Could be bearing I had something similar abs it wad the ps rear bearing or it could be tires have you checked the tire pressure Ave made sure it's not down?
 

vr4ssz

Leaving Skid Marks
Location
NSW
First Name
Shane
Drive
98 PFL Legnum VR-4, 2005 VZ SSZ, 1991 Cressida (1jz converted)
I will check tire pressure on way home from work, hopefully it turns out just to be road noise.
 

PHIL069

1 AYC Bar
Location
SA
First Name
Phil
Drive
FTO
Could be brake pads rubbing on the disks or hand brake shoes rubbing.
Do a few hard braking manouvers to clean up the brakes.
Also pull the handbrake lever lightly while driving and see if the noise changes.
 

vr4ssz

Leaving Skid Marks
Location
NSW
First Name
Shane
Drive
98 PFL Legnum VR-4, 2005 VZ SSZ, 1991 Cressida (1jz converted)
I recently played around with the handbrake as I had to take it all off when I changed the rear knuckle.
 

vr4ssz

Leaving Skid Marks
Location
NSW
First Name
Shane
Drive
98 PFL Legnum VR-4, 2005 VZ SSZ, 1991 Cressida (1jz converted)
Front passenger side wheel, has play back and forward, but not and down....

Would it be safe to say that bearing is stuffed?
 
Top Bottom