Aftermarket Braces

[Guest]

Sway bars (From an ebay seller)
Front 535 311 VA22 - $315
Rear 535 311 VB24 - $315
Lower arm bars
535 475A - $149
535 477A - $249
Rear strut bar
535 541A - $249
508 541A - $249


.................................................................................................................................


Thank you for your enquiry. Below is price information as your request.

* Cusco Stabilizer Bar (Item Code: 535 311 A22): 15600Yen (= currently A$166) --- Part number 535 311 VA22 doesn’t exist.
* Cusco Stabilizer Bar (Item Code: 535 311 B24): 15600Yen (= currently A$166) --- Part number 535 311 VB24 doesn’t exist.
* Cusco Lower Arm Bar Ver. 1 (Item Code: 535 475A): 6400Yen (= currently A$68)
* Cusco Lower Arm Bar Ver. 2 (Item Code: 535 477A): 12800Yen (= currently A$137)
* Cusco Rear Strut Brace Bar Type OS (Item Code: 535 541A): 12300Yen (= currently A$131)
* Cusco Rear Strut Brace Bar Type OS (Item Code: 508 541A): 12300Yen (= currently A$131)


Prices are excluding shipping cost from Japan to your address in Australia.
To order the products, please use one of the order forms on our website.


Regards,

Taki
Perfect Run
sales@perfectrun.com.au

 

[Hipsi]

I've found a rear strut brace from Hong Kong but it says it's to fit a Galant. I wonder how different if at all the strut towers could be between a Galant and a Legnum?

 

[naughtika]

should fit on either models.. it would be easier to install on a legnum cause of space differences..

 

[Hipsi]

EC5A rear strut brace, works out to around $110 AUD delivered.

http://cgi.ebay.com/ebaymotors/ws/e...agename=WDVW&viewitem=&item=250235315716&rd=1

 

[jungle]

I have the X brace on the front of mine, but nothing on the rear.

 

[Guest]

EC5A rear strut brace, works out to around $110 AUD delivered.

http://cgi.ebay.com/ebaymotors/ws/e...agename=WDVW&viewitem=&item=250235315716&rd=1

Anyone purchased that rear strut brace? Can anyone confirm it will fit the Legnum?

Also anyone purchased any cusco lower bars/braces at all?
How did they go, pics? ( I don't mean swaybars)

 

[bradc]

I've just got a rear strut brace, will be fitting it this weekend.

 

[Guest]

I've just got a rear strut brace, will be fitting it this weekend.

Great, is it the upper one or the lower one? Oh upper one so its for the strut right.
Make sure you take some pics
What is the part number of the one you got? or is it the ebay one

 

[Hipsi]

Anyone purchased that rear strut brace? Can anyone confirm it will fit the Legnum?

Also anyone purchased any cusco lower bars/braces at all?
How did they go, pics? ( I don't mean swaybars)

mine's a cusco brace (see previous page)

 

[Guest]

Next question would 3" custom dump pipes fit with either the straight brace or "H" brace at the front?

 

[bradc]

Yeah mine is a cusco one for an ec5w. It is an upper rear.

The lower front braces won't fit with most downpipes. It's the reason I haven't tried to fit mine yet. I will get round to measuring it up and testing it out one day though

 

[Guest]

So we we get custom downpipes made then I guess the lower front braces will fit fine?

Does anyone know the part number for the rear lower brace or is it the same a the sigle type front lower one? (as the "H" style is the other type of front one)

 

[Guest]

Sorry i didnt post sooner, but here you go. Ralliart braces... and the reason its going to be hard to get front pipes

Josh do you have any more pics of your front lower brace you could post up?

 

[frozen]

ill have to wait till the car is up on a hoist again next before i get some decent ones like you're after. give me a few weeks hey?

 

[Guest]

Will this fit our cars? It may snap as its soo cheap though.
http://cgi.ebay.com/ebaymotors/95-9...emQQcategoryZ33591QQihZ023QQitemZ360072132896

 

[bradc]

It might do. The track is very similar on our cars compared to theirs, probably down to a wheel offset difference. I'm not sure though.

 

[frozen]

mm very ...cheap

 

[SiliconAngel]

Jezuz I dunno about you but I wouldn't rely the safety of my car on a $6 ebay item...

 

[frozen]

Long awaited.. heres some more pics i took today. Ignore the split cv boot spraying its grease everywhere......

also see the joys of a lowered car with braces

 

[naughtika]

Emanuel, if you use that brace, you'll still have flex in there, not much but its there..

i'd prefer something more solid, no joins.. just 1 pieces of strong metal but lightweight..