Ayc problem identified but need either a schematic or a good pic from inside the box

jlx

Idling at the Lights
Lifetime Member
Location
Finland
First Name
jan
Drive
Legnum vr 97
Leaving oid changed title
So i would need a decent picture of the component i have managed to blow or find a schematic.


So been scratching my head for a while now and not getting anywhere.
Any suggestions where to start looking for the problem
 
So been scratching my head for a while now and not getting anywhere.
Any suggestions where to start looking for the problem

hey mate, how did you check the relay and fuse? visually or via multimeter?

at times multimeter would provide you false indication that they are ok or in good condition. I often tell people to check the fuse visually as it may be holding on to it's last breath.

As for the relay, they can get sticky and sometimes show as working as it should, but once heated up, it changes its operation. I noticed you're in Finland, so I assume it's almost cool weather there every day?
 
both visually and multimeter and relay is bran new and relay also tested with directly applying voltage to make sure it clicks.
but no voltage applied to the relay when pump is driven via evoscans actuator menu.
and pretty cool this time of year yup.
 
Thank you found one closer with that part number for 95€ still expensive as broken component be a few cents lol
but i guess i buy a new one next year.
 
Top Bottom