so i replaced the factory single din factory tape deck with a pioneer unit.
used an Aerpro APP0111 from the car into am Aerpro APP8PIO5 then onto the deck (X6650BT). 2 mins worth of connecting.
now, im certain ive cleared the back of wires, but the deck just wont sit flush with the centre console.
it sticks out about 4mm and you dont notice it sitting in the drivers or passengers, but you can tell from the sides.
does it just not fit? is it fouling on a bracket somewhere, im certain ive checked everything but i ran out of light
used an Aerpro APP0111 from the car into am Aerpro APP8PIO5 then onto the deck (X6650BT). 2 mins worth of connecting.
now, im certain ive cleared the back of wires, but the deck just wont sit flush with the centre console.
it sticks out about 4mm and you dont notice it sitting in the drivers or passengers, but you can tell from the sides.
does it just not fit? is it fouling on a bracket somewhere, im certain ive checked everything but i ran out of light