Single Turbo Conversion Pics!

raj

1 AYC Bar
Location
Trinidad & Tobago
First Name
Khemrajh
Drive
Galant vr4
Yes you need to change the jacks if using the evo injectors and you gonna use a resistor pack ......I don't have pics of the manifols but you can just carry it at any machine shop and get them to port it for you
 

riska

Idling at the Lights
Location
cayman island
First Name
andrew
Drive
glant vr4
Yes you need to change the jacks if using the evo injectors and you gonna use a resistor pack ......I don't have pics of the manifols but you can just carry it at any machine shop and get them to port it for you
but wat angle did you port it to
 

raj

1 AYC Bar
Location
Trinidad & Tobago
First Name
Khemrajh
Drive
Galant vr4
Here's some pics of a setup I'm doing currently...just carry the manifolds and the pipe you using to make the runners and let them match the bore size that'
All

20180518_165805.jpg

20180518_163554.jpg
 

veegeeta

Leaving Skid Marks
Lifetime Member
Location
qld
First Name
shane
Drive
fto with 6A13TT & bf xr6 turbo
can you show me a picture of how you port out the manifold
I didn't take any pics either. I got flanges made with a 2inch hole bolted the flange to the manifold and die grinded manifold to suit the flange. If that helps
 

raj

1 AYC Bar
Location
Trinidad & Tobago
First Name
Khemrajh
Drive
Galant vr4
Raj you making some real nice power there man
Customer wants over 400whp ....injectors at it peak so after we locate some evo 7 injectors we plan to bump up the boost till around 26psi and see what kinda power she'll put out on 95 octane pump gas and water methanol injection
 

riska

Idling at the Lights
Location
cayman island
First Name
andrew
Drive
glant vr4
Customer wants over 400whp ....injectors at it peak so after we locate some evo 7 injectors we plan to bump up the boost till around 26psi and see what kinda power she'll put out on 95 octane pump gas and water methanol injection
So you running stock injectors now
 

Chekaa_lee

Idling at the Lights
Location
Coral springs
First Name
Chekaa
Drive
Mitsubishi mirage 6a13tt
At it again with another single turbo conversion....
this time with aftermarket manifolds
modified intake
garrett GTW3684R twin scoll a/r .78 turbine housing
stock head and block just fitted with head studs
stock coils/wires @ this point started failing on the dyno
project isn't finished just excited to get some results
407whp @ 342tq @ 24psi boost



Where can i find those after market manifolds ?
 

Chekaa_lee

Idling at the Lights
Location
Coral springs
First Name
Chekaa
Drive
Mitsubishi mirage 6a13tt
Top Bottom