Pin 1 pic only needs the 3 pins welded at one end because the other end of the pins are inside a hardened surface.Hey Guys,
Has anybody got any additional information in regards to the Pins / Bolts that need to be welded in place?
Maybe some pictures?
My Legnum is currently at TechSport. The Auto suddenly became noisy in second and third gears.
In first through to third it was really down on power, then once shifting into fourth the car was fine again.
Jeff has drained the fluid, and there does not appear to have any metallic parts in there.
I am trying to work out about rebuilding the one that is in there, or having a 2nd hand one installed. But if I go the 2nd hand route,
will want to check the wave spring and alike before it goes in.
Regards
Gavin
Not yet. Still talking to the seller regarding priceSo you brought the car ?
I remember people here highly recommend a transmission place called Parramatta Automatics and think it was between $1500 to $2000.
Could be more or less now, worth giving them a call Monday.
Got the car and will be getting the a new auto put in. And get the work done to the box before it's installed. Hopefully by SteveCool just didn't see it on gumtree anymore and thought you brought it.
But yeah Parramatta Automatics, give them a call Monday and hopefully they can quote you over the phone.
So this is the general cheap way people are strengthening their boxes? Is there anything else without going too extreme?Pin 1 pic only needs the 3 pins welded at one end because the other end of the pins are inside a hardened surface.
Pin 2 pic needs welding at both ends of each because both surfaces are just mild steel & all 6 holes will elongate. The 3 dowl pins won't be needed.
Pic 2 was a GTA runing E85 btw
Cheers - Aldo
So this is the general cheap way people are strengthening their boxes? Is there anything else without going too extreme?
the internal filter replaced and a strengthened steel pump gear fitted.
I'll leave all that for a later discussion as I'm not taking the box out, and of course you should be doing the wave spring too
Okay, but can you at least clarify... you're talking about an EVO, right???Pretzil I'm not aloud to say anything about my 350kw auto on E85 car mods says a mod in here.
So my lips are sealed. Can't give any advice sorry..
Aldo
Yes my GTA. Same box. Just 3.334 final. Legnum 3.685 finalOkay, but can you at least clarify... you're talking about an EVO, right???
Pretzil I'm not aloud to say anything about my 350kw auto on E85 car mods says a mod in here.
So my lips are sealed. Can't give any advice sorry..
Aldo