By pokey you mean protrude slightly?The stock evo 7 wheels are 17x8 +38, the front might be a little pokey on a stock height pfl though.
Is that because I'm going from 6"to 8", 25mm either side so about 20mm outwards?
Cheers
By pokey you mean protrude slightly?The stock evo 7 wheels are 17x8 +38, the front might be a little pokey on a stock height pfl though.
TLDR........
PFL Legnum Vr-4
Will be running Tein coilovers, currently stock height with 16's of unknown origin
Not a massive choice of suitable wheels here so 18" x 8.0 +32 or 18" x 8.0 +40 ?
I've had 18x9 +36, with 235/40r18's on my facelift for ever, the tyre/inner rim just lightly touches on the inside at the front on full lock.
And the rear just touched the guard when the rear wheel is stuffed way up in the wheel arch, but not anymore so it must have self clearanced.
So very little if any guard work if it's a facelift, maybe a little guard roll if it is a pre facelift.
Im.guessing no. I had 17x9 +30 and they were pretty close to the hub carrier. They fit with 255/45/17 tyres but half an inch wider with 5mm less offset youd be best to test fit.Will 18x9,5 et35 fit on a facelift typeS? Can get those Rota Grid rims cheaply and i'm curious will they fit in