Does anyone have a part number on the face lift front ABS Sensors? I need to find a pair. Any chance anyone knows if they are the same on another model, Magna etc?
Here are some more pics with the brembo's and new lines installed.
The red looks a bit off colour from the flash.
It has made a massive difference in brake performace. Can pull up so much shorter and harder.
From high speed stops to normal stops its made a big difference.
I was also told cusco brake stop are another great upgrade.
(an adjustable stopper to keep pressure against the master cylinder so it doesnt move when the pedal is depressed)
Yes evo 6 to 9iam about to buy a evo 9 brembo brakes setup front and rear will it fit a legnum vr4
If your vr4 is FL, otherwise more parts requirediam about to buy a evo 9 brembo brakes setup front and rear will it fit a legnum vr4
Strange I got Tech Sport to install my brembo brakes using evo braided lines in the front and rear.
ps what size rotors are u running on the brembos front/rear and can u go any bigger thanksiam about to buy a evo 9 brembo brakes setup front and rear will it fit a legnum vr4
ps what size rotors are u running on the brembos front/rear and can u go any bigger thanks
I used HEL brake lines... the fronts you can use stock ones as they are the "banjo" type fitting. the rears stock on the VR-4's are threaded type.. need the banjo fittings on the rear for it to work...
Rears you can get either some good (Low KM) 2nd hand Evo ones (Evos 5-9 that actually had Brembos to start with is a good idea) Possibly Evo 10 ones but can't confirm that.
Think the HEL's were about $120 delivered when I bought them..... the rear HEL braideds actually rub on the hub vertical support/attach point to the upper control arm which isn't ideal...
best to purchase some genuine evo ones TBH...Check Ebay for Evo lancer braided lines and you'll see what's available..