Part numbers to be added to Parts Guide

[gilly]

From Ralliart NZ:
Lower sump MD337434 NZD$140.00 Available
Upper sump MD336720 NZD$340.00 Ex Japan 2 to 4 weeks

 

[fieldy107]

from Ralliart NZ

MD619268 regulator, alternator $290 Avail

MD618689 brush, alternator $29 Japan 2 weeks

MD336781 alternator assy $1400 Japan 2 weeks



MR339001 decal,4wd $20 Japan 60 days

MR339002 decal,4wd $20 Japan 60 days



MR465891 cover kit, front bumper $54 Avail (towhook cover)

MR465884 face kit, front bumper $800 Avail

 

[godzilla]

Is that over $1700 for the complete alternator? Ouuch

 

[fieldy107]

Is that over $1700 for the complete alternator? Ouuch

Could be wrong, but I think if you buy the alternator assy it comes complete with regular and brushes etc. I just got a quote on the lot to help me decide on rebuild or a new unit.

 

[godzilla]

At the prices you posted, i would suggest rebuild.

 

[fieldy107]

haha yeah if I was paying that would be the best idea. Fortunately the dealership finally decided to answer my phone calls and has agreed to have it fixed. At the moment Im using my foot as a regulator, 2.5k rpm seems to keep the battery warning light away

 

[Guest]

Price for Head Gasket - MD342340 = $A93.35 from Lander Mitsubishi, Blacktown

 

[naughtika]

Price for Head Gasket - MD342340 = $A93.35 from Lander Mitsubishi, Blacktown

is that each or for both banks?

 

[SiliconAngel]

Well the original part numbers (original MR216132, replacement according to Mitsubishi's Parts distributor MR513005) for the A/C condenser don't actually work any more, according to Mitsubishi Japan. However they were able to cross-reference my VIN and came up with the following, from Mitsubishi Electric:

CAA311B104 - - - ¥34,650

And yes, you read that correctly - apparently that part is manufactured and supplied by Mitsubishi Electric, not Mitsubishi Motors - go figure!

Kudos to Jesse Streeter for helping to figure this out and chase up pricing

Flags: airconditioner condenser; aircon condenser

 

[Donkay]

Is the Part number for the Auto ECU a Pre or later facelift?

 

[Guest]

Is the Part number for the Auto ECU a Pre or later facelift?

It's not a preface number but I would have to check ASA when I got home tonight to confirm the years of the ones listed

Engine Control Unit (ECU) MT . . . . . MR578135 . . . . CAPS ref: 82522
Engine Control Unit (ECU) AT . . . . . MR578136 . . . . CAPS ref: 82522

 

[Jimmy]

65-6304 ........ Alternator full assembly ...... Jaylec, 12v, 110Amp, 97 and onwards .... $556.00 from supercheap

(price may vary alittle depending on stock and where they have to frieght it from)

Also can be found on Ebay.

Alternator Suit Mitsubishi Legnum Galant 6A13TT 110A Jaylec | eBay

 

[naughtika]

I think Jaylec can also be acquired from Burson.. will see if how much my dad can get it for.. $556.00 stills seems a bit steep for me..

will let everyone know tomorrow

 

[fieldy107]

its 110A, maybe the reason for it costing more then the average alternator. Most car seem to run 75A or so?

 

[wesleyong]

From the parts number guide:
Oil Seal 35-50-8mm replaces MD372536 . . . . 400445P . . . . . 5.70
Oil Seal 37-50-6mm replaces MD372536 . . . . 402040P . . . . . 5.50

Does that mean both sizes of the oil seal fit??? Doesn't seem right...

 

[wesleyong]

Hey guys,

It seems that there might be an error with what is listed in the parts number guide for the oil seals.

I've been doing a lot of calling around Mitsubishi dealers. Apparently MD133317 supercedes to MD372536, which is supposed to be the FRONT seal.

The rear seal I believe remains to be MD180402. I will confirm when this ordeal is over!

 

[naughtika]

All sort of Clips that you may use with your car..

http://www.clipsandfasteners.com/Mitsubishi_Clips_And_Fasteners_s/70.htm

seems like they're cheaper than autobarn (if bought in bulk) or mitsubishi

here are some pics..

they're in US $$ btw..

gonna order some on thursday.. postage costs shouldn't be much..

 

[cyber_scriber]

Do you have any idea whether these clips can be used to fasten the plastic undertray that sits under our engines?

 

[PeteGT]

Before you order from the states give these guys a call
http://www.fastex.com.au/scrivets.htm

Not specific mitsubishi parts, but it should be fairly easy to match up dimensions for the application.

 

[naughtika]

Do you have any idea whether these clips can be used to fasten the plastic undertray that sits under our engines?

dunno about the first pic, but will find out.. will measure the ones current on my under tray.. unless someone can do it quicker than me

about the 2nd pic, i think they're the bumper clip.. but I also know that they fit snuggly..

so will order a few types to try out and let you guys know..