Part numbers to be added to Parts Guide

[rooks]

What were the prices?

Will confirm when i get home tonight. $16 for gormmet and PCV from memory.

 

[veegeeta]

have tried to buy these gasket kits with no luck any one have the phone number for coventrys as aa gaskets is a whole sale and wont supply even know i have a abn dont want to pay over $200 when should be able to get for $66 each help please thank you

Purchased from Coventrys
Brand: Torqueone (AA gaskets, Victoria 1800 620 895 )
Code: RC3022K
Price:$66 per kit (need 2 kits)
1 Rocker cover gasket, 3 spark plug seals, 9 bolt seals

 

[Macca]

I would like to know the answer to the above too as I'll be looking for the above kit too and thats a great price. Can anyone help us out?

 

[naughtika]

I tried Burson, even with my dad's account its still $200 for the kit (front and rear).. + postage from Melbourne

 

[rooks]

Got those rocker gasket kit about 3 weeks ago. I doubt the prices would have changed since then!
http://www.cgl.com.au/cgl-corporate/locations/find-a-branch

 

[Macca]

Got those rocker gasket kit about 3 weeks ago. I doubt the prices would have changed since then!
http://www.cgl.com.au/cgl-corporate/locations/find-a-branch

I just called the office in Darwin, apparently they sold their auto devision to repco, I called them and the kits are $105 each. Who wants the buy them for me down south and post them up here?

 

[lathiat]

5-speed rebuild parts. Pasting and also including a picture because it's easier to line up in the picture than the text verson

note that the "replacement part" section includes replacement parts which were unified and must be used together, you need the trio of spring, sleeve and ring assembly for each gearset.

1-2 and 3-4 are shared with evo 8-9
5-R are *different* for evo 8-9 but the same as evo 5-6.

PNC Qty Descr ORIG PART REPLACEMENT PART AMAYAMA
22545A 1 RING ASSY,M/T 1ST SPEED GEAR SYNCH MD748059 MR581432 $98.58
22546A 1 RING ASSY,M/T 2ND SPEED GEAR SYNCH MD748059 MR581432 $98.58
22557 1 SLEEVE,M/T 1ST & 2ND SYNCH MD749220 MR581384 $73.18
22595P 2 SPRING,M/T SYNCH KEY MD748670 MR581387 $3.68

22547A 1 RING ASSY,M/T 3RD SPEED GEAR SYNCH MD770333 MD770348 $98.58
22596P 1 RING,M/T SYNCH MD748058 MD748058 $41.07
22562 1 SLEEVE,M/T 3RD & 4TH SYNCH MD748591 MR581388 $53.77
22595 2 SPRING,M/T SYNCH KEY MD744602 MR581389 $3.68

22596S 1 RING,M/T SYNCH MD747300 MN168937 $41.07
22592 1 RING,M/T OUTPUT SHAFT REV SYNCH MD748599 MN168936 $41.07
22558 1 SLEEVE,M/T 5TH & REV SYNCH MD746485 MN168857 $53.77
22595Q 2 SPRING,M/T SYNCH KEY MD747926 MR581383 $4.01

22008 1 BEARING,M/T INPUT SHAFT MD746715 MD746715 $44.05
22008W 1 BEARING,M/T INPUT SHAFT MD747744 MR980742 $37.06
22409 1 BEARING,M/T OUTPUT SHAFT MD747745 MD747745 $33.23
22409W 1 BEARING,M/T OUTPUT SHAFT MD748457 MD748457 $29.39

22017 OIL SEAL, M/T INPUT SHAFT MB936826 MB936826 $9.00 (input shaft seal i *think*.. can't remember)
21195P CAP,M/T CASE SEAL MF665535 MF665535 $1.33 (this is the little brass punch in that covers the hole for the clutch fork pivot rod)

 

[lathiat]

In case someone needs this for some reason, this is for the *EA5W*.. NATURALLY ASPIRATED, FRONT WHEEL DRIVE.. this is NOT for a VR-4

I needed to get a clutch... Exedy AU know nothing about the car (not surprising) or the UK kit number.. had to call Exedy UK to get the kit breakdown (only the kit part number was on the site), then call Exedy AU to match them up.. they finally matched up to Australian Kit MBK-7448.. will find out if it fits when it arrives.. got it for AU $320.


Clutch Kit:
Exedy UK MBK2097
Exedy AU MBK7448

Clutch Cover:
Exedy UK MBC568
Exedy AU MBC568
Mitsubishi MD749763

Clutch Disc:
Exedy UK MBD047U
Exedy AU HYD114U
Mitsubishi MD741736 (Was: MR446227)

Clutch Bearing:
Exedy UK BRG439
Exedy AU BRG2172
Mitsubishi MD722744

Also found the engine facing input shaft bearing MD700207, available from NSK distributors as B25-139C3 for approx. $30 + $15 air freight.

 

[Guest]

I have been chasing A set of Urethane Mounts for a week or so that would just fit directly into our cars, without the Eclipse mounts or purchasing an extra front roll stopper or anything. A Complete kit is available here which Is a direct fit
http://www.energysuspensionparts.co...hane_PackageDeal001&reviewrate=&viewall=&re=#

Dont know what to give as the Part numbers, the kit includes 13-503/13-505/13-508/13-509.
13-505 is the front roll stopper I believe
13-503 Is the Rear Roll Stopper
13-508 and 13-509 are the top two mounts but nor sure which is left or right. I will be able to verify when My kit arrives and let you guys know. Delete this if its old news.

 

[TME_Steve]

Anyone know the rear wheel bearing part numbers? Preferably an NTN and a Mitsu number....

 

[VOLK]

From what I can see, Mitsu will only sell a complete hub & bearing assembly.

 

[TME_Steve]

Feck

 

[qball]

From club vr4 the Eclipse AWD ones are the same from the US. Sent you a PM about them

 

[Macca]

Anyone know where we can get a complete solid rubber engine mount kit?

 

[TME_Steve]

You can't to my knowledge, but you can get stiffer rubber top and gearbox mounts and solid front roll stop and then with the Paulie-Steve bush you can have a solid rear roll stop....

 

[veegeeta]

any one have the part no for the water temp sensor? (the big one with 2 wires) And with new plug. thanks guys !

 

[Guest]

http://mitsubishi.epc-data.com/legnum/ec5w/lygf/cooling/water-pipe-thermostat/10359,10361/
This is probably what you need mate.

 

[Guest]

SENSOR UNIT,WATER TEMPERATURE ----- MD177572 ------- $40-$50 USD From Amayama.

 

[veegeeta]

what brand is it? Gen or non gen? maby i can get through work !

 

[naughtika]

what brand is it? Gen or non gen? maby i can get through work !

thats oe mitsubishi that he posted up..

i think the 7G, CE lancer 4G93 uses the same ?!?